Switching The Drive On And Off; Checking The Lawn Mower And Battery; Checking The Controls - Stihl Rma 348.0 V Notice D'emploi

English
► Press locking button (1) with the right hand
and hold.
► Pull control bar for mowing (2) with the left
hand fully in the direction of handlebar (3) and
hold so the thumb encloses handlebar (3).
The blade rotates.
► Release locking button (1).
► Hold handlebar (3) and control bar for mow‐
ing (2) with the right hand so the thumb enclo‐
ses handlebar (3).
10.1.2 Deactivating the Blade
► Release the control bar for mowing.
► Wait until the blade is no longer turning.
► If the blade continues to turn: remove the bat‐
teries and consult a STIHL specialist dealer.
The lawn mower is defective.
10.2

Switching the Drive On and Off

10.2.1 Engaging Self-propulsion
The lawn mower speed can be continuously
adjusted from 1.6 km/h to 4.5 km/h. In this posi‐
tion , the lawn mower drives at the highest
speed. In this position
at the lowest speed.
The set speed influences the battery life. The
lower the speed, the longer the battery life.
► Place the lawn mower on a level surface.
► Activate the blade,
► Pull control bar for self-propulsion (1) fully in
the direction of handlebar (2) and hold so the
thumb encloses handlebar (2).
The lawn mower starts moving.
► Move lever (3) to the desired position.
14
, the lawn mower drives
10.1.1

11 Checking the Lawn Mower and Battery

10.2.2 Disengaging Self-propulsion
► Release the control bar for self-propulsion.
► Wait until the lawn mower comes to a stand‐
still.
► If the lawn mower continues moving: remove
the batteries and consult a STIHL specialist
dealer.
The lawn mower is defective.
11 Checking the Lawn Mower
and Battery
11.1

Checking the Controls

Locking button and control bar for mowing
► Remove the battery.
► Press the locking button and release it again.
► Pull the control bar for mowing fully in the
direction of the handlebar and release again.
► If the locking button or the control bar for mow‐
ing is stiff or does not spring back into the ini‐
tial position: do not use the lawn mower and
consult a STIHL specialist dealer.
The locking button or the control bar for mow‐
ing is defective.
Control bar for self-propulsion
► Remove the battery.
► Pull the control bar for self-propulsion fully in
the direction of the handlebar and release
again.
► If the control bar for self-propulsion is stiff or
does not spring back into the initial position:
do not use the lawn mower and consult a
STIHL specialist dealer.
The control bar for self-propulsion is defective.
Lever
► Remove the battery.
► Set the lever to
► If the lever is very smooth: do not use the lawn
mower and consult a STIHL specialist dealer.
The lever is defective.
Activate the blade
► Fit the battery.
► Press the locking button with the right hand
and hold.
► Pull the control bar for mowing with the left
hand fully in the direction of the handlebar and
hold so the thumb encloses the handlebar.
The blade rotates.
► Release the locking button and the control bar
for mowing.
The blade stops turning after a short time.
then to .
0478-131-9978-A