Télécharger Imprimer la page

Assembling The Lawn Mower; Attaching The Handlebar - Stihl Rma 353.0 Notice D'emploi

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

8 Assembling the Lawn Mower

8
Assembling the Lawn
Mower
8.1

Attaching the handlebar

WARNING
■ When attaching the handlebar, fingers or other
body parts may get caught between the parts
of the handlebar.
► Work carefully.
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Align the upper handlebar (1) and lower han‐
dlebar (2) so the pin (4) engages in the
hole (3) on both sides.
► Insert the screws (5) on both sides and align
them so the screw head is flush with the lower
handlebar (2) on both sides.
► Screw on the star knob nuts (6) on both sides
and tighten.
► Push the cable (7) into the holder (8).
The handlebar does not need to be removed
again.
8.2
Fitting and Removing the
Grass Box
8.2.1
Engaging the grass catcher box
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► If an extension is attached, detach the exten‐
sion,
8.4.2.
► If a mulching insert is in place: remove the
mulching insert,
0478-131-9979-A
8.3.2.
► Open the discharge flap (1) and hold it open.
► Take hold of the grass catcher box (2) by the
handle (3) and attach the hook (4) to the
shaft (5).
► Lower the discharge flap (1) onto the grass
catcher box (2).
8.2.2
Detaching the Grass Catcher Box
► Switch the lawn mower off.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
8.3
Fitting and Removing the
Mulch Plug
8.3.1
Inserting the mulching insert
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Open the discharge flap (1) and hold it open.
► Take hold of the mulching insert (2) by the
handle (3) and insert it in the discharge
chute (4).
► Close the discharge flap (1).
8.3.2
Removing the mulching insert
► Switch off the lawn mower and remove the
batteries.
► Place the lawn mower on a level surface.
► Open discharge flap and hold it open.
► Remove the mulching insert.
► Close discharge flap.
English
11

Dépannage

loading