Unpacking; Before Commissioning - Scheppach Dh1500Plus Traduction Des Instructions D'origine

Protection class
Weight
Danger!
Noise and vibration
The noise and vibration levels have been determined
in accordance with EN 62841-1.
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Total vibration emission values (vector sum of three
directions) determined per EN IEC62841.
Main handle
Hammer drills in concrete:
= 11,692 m/s , K = 1.5 m/s
a 2
h(HD)
Additional grip
Hammer drills in concrete:
= 14,245 m/s , K = 1,5 m/s
a 2
h(HD)
Main handle
= 11.692 m/s
Chiselling: a
h(CHeq)
Additional grip
= 14.245 m/s
Chiselling: a
h(CHeq)
The vibration emission value speci ed has been meas-
ured in accordance with a standardised test procedure
and may change depending on the type and manner in
which the electric tool is used and may be above the
speci ed value in exceptional cases.
The speci ed vibration emission value can be used to
compare one electric tool with other.
The speci ed vibration emission value can also be
used for an initial assessment of the impairment.
Keep the noise level and vibration to a minimum!
• Only use faultless devices.
• Maintain and clean the device at regular intervals.
• Adapt your working methods to the device.
• Do not overload the device.
22 | GB
II
5.3 kg
91 dB
3 dB
99 dB
3 dB
2
2
, K = 1.5 m/s
2 2
, K = 1.5 m/s
2 2
www.scheppach.com
• Have the device checked if necessary.
• Switch the device o if it is not in use.
• Wear gloves.
7.

Unpacking

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the device by means of the
operating manual before using for the rst time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m WARNING!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, lms or small parts! There is a danger of
choking or su ocating!

8. Before commissioning

Before connecting the machine, make certain that the
data on the type plate matches with the mains power
data.
Warning!
Always pull out the mains plug before carrying out
adjustments on the device.
Check the deployment location for hidden electrical
lines, gas pipes and water pipes using a cable detector.
Additional grip (Fig. 2)
For safety reasons, only use the hammer drill with
the additional grip.
The additional handle (7) allows the user additional
hold when using the hammer drill. For safety reasons,
it is not permitted to use the device without the addi-
tional handle (7).