DS Produkte Z 08024 Mode D'emploi page 22

EN
Step 2: Bottom tube rod
Step 3: Foot pedal
Step 4: Hand pedal
1. Attach the top tube rod (No. 12) to the bottom tube rod with the aid of the large lock-
ing screw (No. 11).
2. Attach the hand pedal (No. 13) to the top tube rod with the aid of two small pan head
bolts (No. 8).
3. Fix the two bolts in the tube rod with the aid of two washers (No. 7).
4. Screw a small adjusting screw (No. 9) onto the hand pedal.
Place the hand pedal onto the top tube rod in such a way that the recess for the
locking screw faces upwards.
First screw the bolts loosely into the tube rod and tighten them once both bolts
are fi xed in the tube rod.
22
1. Attach the bottom tube rod (No. 10) to the ba-
sic frame with the aid of two small pan head
bolts (No. 8).
2. Fix the two bolts in the tube rod with the aid
of two washers (No. 7).
Place the tube rod onto the basic frame
in such a way that the recess for the ad-
justing screw faces upwards (see also the
"Exploded Drawing" section).
First screw the bolts loosely into the tube
rod and tighten them once both bolts are
fi xed in the tube rod.
1. Attach the foot pedal (No. 6) to the basic
frame with the aid of two small pan head
bolts (No. 8).
2. Fix the two bolts in the basic frame with the
aid of two washers (No. 8).
3. Screw a small adjusting screw (No. 9) onto
the foot pedal.
First screw the bolts loosely into the basic
frame and tighten them once both bolts
are fi xed in the basic frame.