Positioning The Logs - Dru PALAZZO 03 Instructions D'installation Et Mode D'emploi

OPERATING INSTRUCTIONS

Positioning the logs

Position the logs as follows:
• Lay the large log against the back wall, on the log
supports.
• Fill the burner with vermiculite (this is in the plastic bag
with the log set).
• Spread it evenly over the burner tray and the surrounding
tray.
• Sprinkle the bag of brown embers, black and yellow chips
on the top of the vermiculiet on the burner to create a
glowing effect on the burner bed.
• Make sure that no vermiculite gets on or into the pilot
light burner, as this could prevent it from working
properly.
• Now lay the rest of the logs in place as illustrated in fig. 5.
The logs should not be laid in any other way as this could
cause the formation of soot. Neither should the logs touch
pilot light burner.
You can "play" with the flames by moving the vermiculite,
embers and chips about on the burner bed until you have
created the desired flame effect.
Do not use any materials other than those supplied.The
supplied materials are incombustible and have been
manufactured specifically for this appliance.
fig. 5
16