Dave Smith Instruments Prophet REV2 Mode D'emploi page 86

Arpeggiator
The Prophet Rev2 has a full-featured arpeggiator. Turn it on, hold a
chord and the synthesizer will play a pattern based on the individual
notes held. Choose a mode (up, down, random, etc.), an octave range (1,
2, or 3), and a tempo, then pair it with an appropriate sound and explore.
While you hold down a chord, pressing any additional notes will add
those notes to the arpeggio. You can change chords and notes and the
arpeggio will continue to play as long as at least one note is always held.
You can also use the
hold
, you can release the notes on the keyboard and the arpeggio will
hold
continue to play — with any additional notes that you play added to the
arpeggio.
To prevent the arpeggiator from adding new notes to an arpeggio when keys
are continuously held (and instead start a new arpeggio each time you change notes),
turn arp relatch in the arpeggiator. To do this, press the arpeggiator's
on
and scroll to the arp relatch menu item in the display.
Set the tempo of the arpeggiator with the
controls in the
clock
4 times to set the tempo. You can also sync the arpeggiator to external
MIDI clock, or even an external audio signal. When the arpeggiator is
playing, the sequencer is disabled.
CLOCK
BPM DIVIDE
TAP TEMPO
The Clock and Arpeggiator controls
Prophet Rev2 User's Guide
feature with the arpeggiator. When you enable
tap tempo
section. To use
tap tempo
ARP
MODE
ON/OFF
button
mode
or and
bpm divide
, tap this button at least
Arpeggiator 39