Publicité
Les langues disponibles
Les langues disponibles
Jump mode uses an absolute value based upon the position of the pot
when edited: turn a pot and the value jumps immediately from the stored
value to the edited value.
18. Alt Tuning: Equal Temperment, 1...17—
Rev2's built-in tunings. Set to 1.
chromatic tuning. Choosing 2 through 16 selects an alternative, non-chro-
matic, non-Western scale that can be used to emulate ethnic instruments or in
other creative ways.
See Appendix A: Alternative Tunings on page 71 for a description of each
tuning. Additional tunings can be imported as a SysEx message. For more
information, see Appendix A.
19. Screen Saver: On, Off—
in screen saver that puts it to sleep when not in use. This features is
designed to prolong the life of the display and we recommend using it. If,
however, you want to disable this feature you can do so by setting it to Off.
20. Seq Pedal Mode: Normal, Trigger, Gate, T-G—
signals received on the rear-panel
•
With
selected, a footswitch will start sequencer playback.
normal
•
With
selected, an audio signal connected to the
trig
step the sequencer when the sequencer's
•
With
selected, an audio signal connected to the
gate
jack will trigger and gate the envelopes while you hold a note or
chord. Additionally, turning on the sequencer or arpeggiator will add
sequencer or arpeggiator playback — but controlled by the Prophet
Rev2's clock
bpm
•
With
-
(
t
g
trigger
jack will trigger and gate the envelopes while you hold a
sequencer
note or chord. Additionally, pressing the sequencer's
also add synchronized sequencer playback.
21. Pedal Polarity: Normal, Reversed—
tary footswitches, normally open and normally closed. Either type can
be used with the Sustain switch input. This setting allows you to accom-
modate both models in case yours behaves in a way that is the opposite
of what you expect due to its polarity. (Sustain is on until the footswitch
Prophet Rev2 User's Guide
Selects one of the Prophet
equal temperment
The Prophet Rev2 display has a built-
jack.
sequencer
and
settings and not the audio trigger.
value
+
) selected, an audio signal connected to the
gate
There are two types of momen-
, the tuning is standard,
Selects the mode for
jack will
sequencer
button is on.
play
sequencer
button will
play
Global Settings
17
Publicité
