Dave Smith Instruments Prophet REV2 Mode D'emploi page 128

Adding Aftertouch
Aftertouch is a performance feature that allows you to add modulation to
a sound by applying additional pressure to a key after the key is already
down. The greater the pressure applied, the more modulation is applied.
The Prophet Rev2 provides monophonic (or "channel") aftertouch,
which means that applying pressure to any key within a chord will apply
modulation to all notes currently held.
The section lets you choose the amount of modulation
modulation
applied using aftertouch and also which parameters are modulated (oscil-
negative amount.
( ), set a positive amount of pressure, then press the keys harder,
cutoff
the sound become brighter.
tive
become more muted.
To choose aftertouch (pressure) as a source for modulation:
1. In the
modulation
knob next to the display to scroll to Mod Slot 1 if it's not already
eter
displayed.
2. Use the
parameter
to scroll through the various mod sources and choose
3. Use the
parameter
to scroll through the various mod destinations and choose a parameter
(such as
cutoff
4. Hold down a note on the keyboard. Then, press harder.
5. Use the
parameter
knob to set the amount to your preference. Higher
add greater modulation the harder you press a key. A negative amount
setting will apply modulation in the negative direction.
60 Adding Aftertouch
section, press the
source
knob to select the
source
knob to select the
dest
).
knob to select the
amount
nega-
button. Use the -
param
knob
value
.
pressure
knob
value
value
settings
amount
Dave Smith Instruments