Dave Smith Instruments Prophet REV2 Mode D'emploi page 170

Status Second
1011 nnnn 0000 0001
1011 nnnn 0000 0100
1011 nnnn 0000 0111
1011 nnnn 0100 1010
1011 nnnn 0010 0000
1011 nnnn 0100 0000
1011 nnnn 0111 1011
1011 nnnn 0111 1001
See sections below for additional Continuous Controller (CC) and Non-
Registered Parameter Number (NRPN) messages received.
Transmitted Channel Messages
Status Second
1000 nnnn 0kkkkkkk
1001 nnnn 0kkkkkkk
1011 nnnn 0vvvvvvv
1100 nnnn 0ppppppp
1101 nnnn 0vvvvvvv
1110 nnnn 0vvvvvvv
Notes: 0kkkkkkk
nnnn
0vvvvvvv
Prophet Rev2 User's Guide
Third Description
0vvvvvvv Mod Wheel: directly assignable controller
0vvvvvvv Foot Controller: directly assignable controller
0vvvvvvv Volume: Combined with Master Volume and Program
Volume
0vvvvvvv
0vvvvvvv Bank Select: 1 - 4 select user banks 1 - 4; 5 - 8 select
factory banks 1 - 4; others ignored
0vvvvvvv Damper pedal: Holds envelopes in Sustain if 0100 0000
or higher
0vvvvvvv All Notes Off: Clear all MIDI notes
0vvvvvvv Reset All Controllers: Clears all MIDI controllers to 0,
MIDI volume to maximum
Third Description
0000000 Note Off.
0vvvvvvv Note On.
0vvvvvvv Control Change; see "Transmitted Controller Messages"
Program change, 0-127 for Programs 00-128 within
current Bank
Channel Pressure
0vvvvvvv Pitch Bend LS Byte then MS Byte
Note number 0 — 127
Channel number 0 to 15 (MIDI channel 1-16).
Ignored if MIDI channel set to ALL
Value
Appendix E: MIDI Implementation 81