Télécharger Imprimer la page

Dave Smith Instruments Prophet REV2 Mode D'emploi page 44

Publicité

Les langues disponibles

Les langues disponibles

is pressed and then it turns off, which is the opposite of the expected
behavior.) Connect your pedal and choose the appropriate setting based
on its behavior.
Sets the function for the Sustain
22. Sustain Arp: Arp hold, Sustain—
pedal input the rear of the synthesizer. Selecting
and pressing
arp hold
the sustain pedal causes the arpeggiator to hold the current arpeggio as
if you had pressed the hold button on the front panel. Selecting
sustain
chooses normal sustain pedal operation.
Calibrates the Pitch and Mod wheels.
23. Calibrate Wheels—
Loads a basic, template program.
24. Basic Program—
25. Calibrate—
the factory and generally don't require re-calibration or re-tuning.
Sets the global parameters to the factory default
26. Reset Globals—
settings.
Transmits the current program in SysEx format via
27. Dump Program—
the selected MIDI port. Dumped programs will load back into the same
location in memory when imported back into the synth via MIDI.
Transmits the current bank in SysEx format via the
28. Dump Bank—
selected MIDI port. (See item 10, "MIDI Sysex Cable.") Dumped banks
will load back into the same location in memory when imported back
into the synth via MIDI.
Transmits all four User Banks in SysEx format
29. Dump All Banks—
via the selected MIDI port. (See item 10, "MIDI Sysex Cable.") Dumped
banks will load back into the same location in memory when imported
back into the synth via MIDI.
18
Global Settings
Dave Smith Instruments

Publicité

loading

Produits Connexes pour Dave Smith Instruments Prophet REV2