Publicité
Les langues disponibles
Les langues disponibles
Split Programs
In split mode, playing a key on the left side of the keyboard will play the
Layer A sound and playing a key on the right side will play the Layer B
sound. Polyphony is allocated equally between the two sounds, with half
of the available voices on Layer A and half on Layer B.
and is saved with the program.
All factory programs have a "B" layer, even if that layer isn't currently enabled.
To turn Split on:
•
If it's not currently lit, press the
lit. The left side of the keyboard plays the Layer A sound and the right
side of the keyboard plays the Layer B sound.
To turn Split off:
•
If it's currently lit, press the
Only the program on Layer A is heard across the full range of the
keyboard.
To set the split point:
1. Make sure the
2. Press and hold the
This sets the start point for Layer B.
3. Release the
split a
To swap Layer A and Layer B sounds:
1. Press both the
2. Turn the
parameter
3. Press the
write
Prophet Rev2 User's Guide
split a
|
button. The button becomes unlit.
split a
b
|
button is lit.
split a
b
|
button and press a key on the keyboard.
split a
b
|
button.
b
|
button and the
split a
b
knob and select
swap a and b
button. Layer A and B are swapped.
split point,
|
button. The button becomes
b
+
button simultaneously.
stack a
b
.
Getting Started
9
Publicité
