Dave Smith Instruments Prophet REV2 Mode D'emploi page 136

Exporting Programs and Banks
You can use the
pgm dump
current program, bank, or all banks in SysEx format via the selected
MIDI port. This allows you to save your programs so that you can share
them or archive them. You will need a computer and software application
such as SysEx Librarian for Macintosh, or MIDIOX for Windows.
1. Connect your synthesizer to a computer using a USB cable.
2.
ure it to receive SysEx messages.
3. Press the
global
4. Use the
parameter
knob to choose
5. Use the
parameter
, depending on which of these you would like to do.
banks
6. Press . The program or bank is exported
write
Dumped programs will load back into the same bank and program location in
memory when received by the Prophet Rev2 via MIDI.
Programs can also be dumped directly from one Rev2 to another using
the MIDI DIN jack, if the
menu.
global
1. Connect two Rev2 synthesizers together using MIDI cables and the
midi in and midi out
2. Press the
global
3. On both synthesizers, use the
, then use the
cable
64 Exporting Programs and Banks
command in the
global
button on your synth.
knob to select
midi sysex cable
.
usb
knob to select
dump prog
parameter is set to
midi sysex cable
jacks on their rear panels.
button on Rev2 that you want to send programs from.
parameter
knob to choose
value
menu to transmit the
, then use the
value
, , or
dump bank dump all
midi
knob to select
midi sysex
.
midi
Dave Smith Instruments
-
in the