Calibrating the Prophet Rev2
Because the Prophet Rev2 is calibrated at the factory, controls such as
the Pitch and Mod wheels shouldn't require re-calibration. However, if
for some reason you experience unexpected behavior with these controls,
you can use the built-in calibration function to tune them occasionally.
Calibrating the Oscillators and Filters
1. Press the
global
2. Use the
parameter
3. The synthesizer performs its auto-calibration procedure. Don't turn off
the power while it's doing this.
4.
can play the Prophet Rev2 again.
Calibrating the Pitch and Mod Wheels
To calibrate the Pitch and Mod wheels:
1. Press the
global
2. Use the
parameter
instructions in the display.
3.
can play the Prophet Rev2 again.
Resetting the Global Parameters
If you're trying to track down a problem, it's sometimes a good idea to
reset the Global parameters to their defaults. This is a quick way to make
sure that the Prophet Rev2 returns to its factory settings.
To reset all Global parameters to their default settings:
1. Press the
global
2. Use the
parameter
66
Calibrating the Prophet Rev2
button.
knob to select
calibrate
button.
knob to select
calibrate wheels
button.
knob to select
reset globals
, then press the
button.
write
, then follow the
, then press
write
Dave Smith Instruments
.