Weller WE 1 Traduction De La Notice Originale page 15

Technical Data
Soldering station
Dimensions L x W x H
Weight
εaТns suppХв voХtaРО
Power consumption
SaПОtв МХass
Temperature range
Tool dependent
TОmpОraturО aММuraМв
TОmpОraturО stabТХТtв
Soldering iron
Temperature range
Power consumption
εaТns suppХв voХtaРО
Heat-up time
(50°C to 350°C) (120°F to
660°F)
Tip top condition
SuppХв unТt
Subject to technical alterations and amendments.
Temperature performance
The soldering tool has an internal usage sensor which can
bО usОН to sОt an automatТМ sаТtМСάoПП ПunМtТon (StanНάbв)έ
The settings can be found in the station's operating instruc-
tions.
www.valuetronics.com
WE 1
(mm) 150 x 125 x 100
(Inch) 5,91 x 4,92 x 3,94
(kg) 1,9
( V / Hz) 230 / 50/60
120 / 60
100 / 50/60
(W) 85
I, antistatic housing
III, Soldering tool
(°C) 100 - 450
200 - 850
(°F)
(°C/°F) Average tip tem-
perature can be
„offset" to +/- 5°C
(+/-°9F) at idle with
no load
(°C/°F) ± 6 / ± 10
WEP 70
(°C / °F) 50-450
(W) 70
(V AC) 23
(s) 28
ET
WE 1
Symbols
Caution!
Warning! Risk of burns!
Read the operating instructions!
ESD-compatible design and ESD-compatible
workstation
ψОПorО pОrПormТnР аorФ oП anв ФТnН on tСО unТt,
aХаaвs НТsМonnОМt tСО poаОr pХuР Пrom tСО
socket.
SaПОtв transПormОr
ωϋ marФ oП МonПormТtв
Disposal
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2012/19/EU on waste
electrical and electronic equipment and its
implementation in accordance with national
law, electric tools that have reached the end
oП tСОТr ХТПО must bО МoХХОМtОН sОparatОХв anН
rОturnОН to an ОnvТronmОntaХХв МompatТbХО
rОМвМХТnР ПaМТХТtвέ
Original declaration of conformity
Soldering station WE 1
Soldering iron WEP 70
We hereby declare that the products described herein
comply with the following guidelines:
2014/35/EU, 2014/30/EU, 2011/65/EU (RoHS)
EN
ENGLISH
15