Ingeteam INGECON SUN 10TL M2 Manuel D'installation Et Usage page 27

External ground protection connection
7.3. External ground protection connection procedure
CAUTION
Connecting the external protection to ground does not imply that the PE connection on the AC section is not
obligatory. Both of these must be correctly connected and grounded.
Ingeteam accepts no liability for the consequences resulting from failure to comply with this instruction.
Connect the terminal using the bolt and washer supplied in the threaded hole intended for this purpose.
ACL2012IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
PT
27