Signature STI3B/2 Instructions D'utilisation page 80


If the cable is damaged or to be replaced, the
operation must be carried out the by after-sale agent
with dedicated tools to avoid any accidents.

If the appliance is being connected directly to the
mains an omnipolar circuit-breaker must be installed
with a minimum opening of 3mm between contacts.

The installer must ensure that the correct electrical
connection has been made and that it is compliant with
safety regulations.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced by
authorised technicians only.
The bottom surface and the power cord of the hob are
not accessible after installation
EN-36