Set the time by touching the slider control. (e.g.
5)
Touch timer control again, the "0" will flash.
Set the time by touching the slider control
(e.g.9), now the timer you set is 95 minutes.
When the time is set, it will begin to count down
immediately. The display will show the
remaining time.
NOTE: The red dot next to power level
indicator will illuminate indicating that zone is
selected.
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
The steps for setting more zones are similar to the steps of setting one zone;
When you set the time for several cooking zones simultaneously, decimal dots of the
relevant cooking zones are on. The minute display shows the min. timer. The dot of
the corresponding zone flashes.
The shown as below:
set more zones:
(set to 15 minutes)
(set to 45 minutes)
EN-18