Failure Display And Inspection - Signature Sti3B/2 Instructions D'utilisation

The induction hob
or a cooking zone
has turned itself off
unexpectedly, a
tone sounds and
an error code is
displayed
(typically
alternating with
one or two digits in
the cooking timer
display).

8. Failure Display and Inspection

The induction hob is equipped with a self diagnostic function. With this test the
technician is able to check the function of several components without disassembling
or dismounting the hob from the working surface.
Troubleshooting
1) Failure code occur during customer using & Solution;
Failure
code
Supply voltage is above the rated
E1
voltage.
Supply voltage is below the rated
E2
voltage.
High temperature of ceramic plate
E3
sensor .（1#）
High temperature of ceramic plate
E4
sensor .（2#）
Technical fault.
Problem
Auto-Recovery
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
Please inspect whether power
supply is normal.
Power on after the power supply is
normal.
Wait for the temperature of
ceramic plate return to normal.
Touch "ON/OFF" button to restart
unit.
EN-26
Solution