How To Use; Start Cooking - Signature Sti3B/2 Instructions D'utilisation

3.3 How to use

3.3.1 Start cooking

Touch the ON/OFF control for three seconds.
After power on, the buzzer beeps once, all displays
show "–" or "– –", indicating that the induction hob
has entered the state of standby mode.
Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the
surface of the cooking zone are clean and dry.
Touching the heating zone selection control, and
an indicator next to the key will flash
Select a heat setting by touching the slider control
• If you don't choose a heat setting within 1
minute, the Induction hob will automatically switch
off. You will need to start again at step 1.
• You can modify the heat setting at any time
during cooking.
EN-13