Care And Cleaning - Signature Sti3B/2 Instructions D'utilisation

6. Care and Cleaning

What?
Everyday 1. Switch the power to the cooktop
soiling on
glass 2. Apply a cooktop cleaner while
(fingerprints,
marks,
stains left by 3. Rinse and wipe dry with a clean
food or
non-sugary 4. Switch the power to the cooktop
spillovers on
the glass)
Boilovers, Remove these immediately with a
melts, and fish slice, palette knife or razor
hot sugary blade scraper suitable for
spills on Induction glass cooktops, but
the glass beware of hot cooking zone
surfaces:
1. Switch the power to the cooktop
2. Hold the blade or utensil at a
3. Clean the soiling or spill up with
4. Follow steps 2 to 4 for
'Everyday soiling on glass'
above.
How?
off.
the glass is still warm (but not
hot!)
cloth or paper towel.
back on.
off at the wall.
30° angle and scrape the
soiling or spill to a cool area of
the cooktop.
a dish cloth or paper towel.
• When the power to the cooktop
is switched off, there will be no
'hot surface' indication but the
cooking zone may still be hot!
Take extreme care.
• Heavy-duty scourers, some
nylon scourers and
harsh/abrasive cleaning
agents may scratch the glass.
Always read the label to check
if your cleaner or scourer is
suitable.
• Never leave cleaning residue
on the cooktop: the glass may
become stained.
• Remove stains left by melts
and
sugary food or spillovers as
soon
as possible. If left to cool on
the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety
cover
is retracted, the blade in a
scraper
is razor-sharp. Use with
extreme
care and always store safely
and
out of reach of children.
EN-23
Important!