Connecting The Hob To The Mains Power Supply - Signature Sti3B/2 Instructions D'utilisation

9.7 Connecting the hob to the mains power
supply
This hob must be connected to the mains power
supply only by a suitably qualified person.
Before connecting the hob to the mains power supply,
check that:
1. The domestic wiring system is suitable for the power
drawn by the hob.
2. The voltage corresponds to the value given in the
rating plate
3. The power supply cable sections can withstand the
load specified on the rating plate.
To connect the hob to the mains power supply, do not
use adapters, reducers, or branching devices, as they
can cause overheating and fire.
The power supply cable must not touch any hot parts
and must
exceed 75˚C at any point.
Check with an electrician whether the domestic
wiring system is suitable without alterations.
Any alterations must only be made by a qualified
electrician.
N1
N2
220-240 V~
be positioned so that its
L2 L1
N1 L2 L1
N2
400V~
220-240 V~
220-240 V~
EN-35
temperature will not
N1
N2
220-240 V~
220-240 V~
L2 L1