Hints And Tips - Signature Sti3B/2 Instructions D'utilisation

Spillovers 1. Switch the power to the cooktop
on the touch
controls 2. Soak up the spill
3. Wipe the touch control area
4. Wipe the area completely dry
5. Switch the power to the cooktop

7. Hints and Tips

Problem
The induction hob
cannot be turned
on.
The touch controls
are unresponsive.
The touch controls
are difficult to
operate.
off.
with a clean damp sponge or
cloth.
with a paper towel.
back on.
Possible causes
No power.
The controls are locked.
There may be a slight film of
water over the controls or
you
may be using the tip of your
finger when touching the
controls.
• The cooktop may beep and turn
itself off, and the touch
controls
may not function while there is
liquid on them. Make sure you
wipe the touch control area dry
before turning the cooktop
back on.
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you've checked everything and
the problem persists, call a
qualified
technician.
Unlock the controls. See section
'Using your induction cooktop'
for instructions.
Make sure the touch control
area is dry and use the ball of
your finger when touching the
controls.
EN-24
What to do