Switching On The Soundbar; Selecting The Audio Source; Setting The Volume - Medion LIFE P61220 Notice D'utilisation

12. Switching on the soundbar

 Switch the soundbar on either by pressing its
trol.
 Switch on your audio device.
 Select a medium volume and start playback.
If a TV or an external device is connected via the AUX or HDMI sockets,
the soundbar will switch on automatically a few seconds after the televi-
sion or the external device is switched on.
If the TV or the external device is disconnected or switched off, the
soundbar will switch off automatically after approximately 15 minutes.
If the volume of the television or external devices is too low, the sound-
bar will also switch off after approximately 15 minutes (but only if the
devices are connected via AUX).

13. Selecting the audio source

Press the SOURCE button on the soundbar or press the OPTICAL, AUX, BT or HDMI
ARC button on the remote control to select the audio source you want: AUX, BT,
HDMI ARC or Optical.
Coloured LED operating displays show which operating mode has been selected:
Operating display
"On/off" LED display
"Vol +" LED display
"Vol +" LED display
"Source" LED display
"Vol -" LED display
"Source" LED display

14. Setting the volume

Press the VOL+/VOL- buttons on the soundbar or on the remote control to set the
volume:
+ increase volume
– reduce volume
Press the MUTE button on the remote control to set the volume to mute.
 Press the MUTE button again to restore the sound.
178
Flashing/lights up
Lights up red
Flashes blue
Lights up blue
Lights up green
Lights up orange
Flashes green
button or with the remote con-
Operating mode
Standby mode
Bluetooth search mode
Bluetooth mode
AUX operating modes
HDMI operating modes
Optical in operating
modes