Inserting Batteries In The Remote Control - Medion LIFE P61220 Notice D'utilisation

6. Inserting batteries in the remote control

The remote control contains a CR2025 3V lithium battery.
The first time you use the re-
mote control, pull off the trans-
parent film without opening the
battery compartment.
Replace the battery if the device fails to re-
act to commands from the remote control
properly. Then follow these steps:
 Press down the locking tab (b) and pull
the battery holder with the battery (a)
out from the remote control. Dispose of
the old battery in accordance with legal
regulations.
 Place a new CR2025-type 3V battery in
the holder (c), with the positive pole
pointing upward. Check the battery po-
larity is correct.
 Slide the holder with the new battery
completely into the slot (d) in the re-
mote control.
170
b
a
d
c