Technical Data; Disposal - DS Produkte 02753 Mode D'emploi

Problem
The device makes unusual
noises or does not vibrate
correctly.

Technical Data

Article number:
Model number:
Class:
Stretch length:
Force:
Voltage supply:
Device:
Remote control:
Power:
Protection class:
Max. loading capacity:
Device dimensions:
Device weight:
Cable length:
Vibration levels:
Programmes:
ID of operating instructions: Z 02753 M DS V1 1019
The training device conforms to EN ISO 20957-1; DIN 32935 and DIN EN 60335-1

Disposal

Dispose of the packaging material in an environmentally friendly manner so that
it can be recycled.
Batteries should be removed from the remote control prior to disposal and dis-
posed of separately from the device at suitable collection points.
The device is governed by the European Directive 2012/19/EU on waste electri-
cal and electronic equipment (WEEE). Do not dispose of the device as normal
domestic waste, but rather in an environmentally friendly manner via an offi cially
approved waste disposal company.
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650*
All rights reserved.
23
Possible cause
The weight on the vibrat-
ing plate (3) is distributed
unevenly or only one side
of the device has a load
on it.
Maximum load capacity
has been exceeded.
02753
RB-CFM006
HB (home use)
85 – 200 cm
44.5 N ± 2 N (with a stretch length of 200 cm)
220 – 240 V ~ 50 – 60 Hz
3 V DC (2 x 1.5 V battery, AAA)
max. 200 W
I
120 kg
approx. 61 x 41 x 11.5 cm
approx. 9 kg
1.5 m
99
10 auto programmes
(Calls to German landlines are subject to your provider's charges.)
Solution
The weight on both halves of
the device must be balanced
for the device to be able to
work properly.
Please note that the device
can hold a max. load of
120 kg.
EN