FUXTEC FX-KSP351 Notice D'instruction D'origine page 49

Translation of original operating instructions for petrol chainsaw FX-KSP series
◼ Activate the chain brake.
◼ Fit the transit cover.
◼ Always secure the chainsaw to prevent it
from falling down or slipping.
◼ Only transport the chainsaw with the fuel
tank and oil tank empty.
Repairs
Repairs may only be carried out in a cus-
tomer service workshop authorised by the
manufacturer.
Disposal information
WARNING!
End-of-life chainsaws must be rendered in-
operable before disposal:
− Completely drain all service fluids from
the chainsaw.
− Remove the guide rail and saw chain.
Protect the saw chain sufficiently.
− Remove the spark plug and plug con-
nector.
Raw material recovery instead of
waste disposal.
The equipment, accessories and packaging
should be recycled in an environmentally
friendly manner. Plastic parts are marked ac-
cordingly for separate recycling.
NOTE
Find out about suitable means of disposal
from your specialist dealer or local council!
Warranty
This product was manufactured according to
the highest standards of quality.
When a new product is purchased, a war-
ranty of 24 months is provided by the manu-
facturer, starting from the date of purchase.
The warranty covers only defects which can
be attributed to a material and/or production
fault as well as non-performance of assured
characteristics.
If a claim is made under warranty, the original
receipt showing the date of purchase must be
presented.
Repairs under warranty may be carried out
only by authorised workshops or service cen-
tres.
A claim may be made under the warranty only
if the equipment has been used as intended.
Excluded from the warranty is any kind of
damage caused by:
− wear parts
− non-intended use
− application of force
− technical modifications
− use of incorrect or not genuine accesso-
ries/spare parts
− attempts at repair by unqualified persons.
NOTE!
Repairs during the warranty period may only
be carried out by qualified and authorised
specialist personnel!
49