FUXTEC FX-KSP351 Notice D'instruction D'origine page 44

Translation of original operating instructions for petrol chainsaw FX-KSP series
◼ First cut the branch from the bottom up (1).
◼ Then cut through the branch from the top (2).
Maintenance and care
WARNING!
Risk of injury!
Sharp saw chain! Wear safety gloves when
working with the saw chain.
In the interest of personal safety!
Only perform the maintenance tasks de-
scribed here yourself.
All other work, particularly engine servicing
and repair, must be carried out by qualified,
authorised specialist personnel. If work is per-
formed incorrectly, equipment damage may
ensue which can cause very serious injuries.
WARNING!
Before carrying out any maintenance, repair,
cleaning and inspection measures, make
sure that the engine is switched off and all of
the components have cooled down. Prevent
unintentional starting of the equipment by
pulling out the spark plug connector.
44
After every use
Clean the air filter
◼ Loose screw to lift filter cover
◼ Remove the filter cover.
◼ Loosen and remove the filter screw.
◼ Take out the filter.
◼ Prise open the two-part filter with a screw-
driver.
◼ Blow out the inside of both filter parts with
compressed air.