Télécharger Imprimer la page

FUXTEC FX-KSP351 Notice D'instruction D'origine page 39

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Translation of original operating instructions for petrol chainsaw FX-KSP series
The oil is available directly from FUXTEC
or a specialist dealer.
Working with the chainsaw
Prerequisites:
− The chainsaw is assembled correctly and
clean.
− All of the necessary settings on the chain-
saw have been carried out.
− The tank is filled with a sufficient volume
of fuel-oil mixture and chain saw oil.
Cold start
CAUTION!
The chainsaw is fitted with an Easy-Start
system.
Do not pull the start handle quickly or suddenly.
CAUTION!
Before starting the engine:
When placing on the ground to attempt to
start the engine, ensure that the saw chain is
not in contact with the ground.
If there is ground contact while the engine is
being started there is an acute risk of accident!
Components of the chainsaw could be dam-
aged beyond repair.
◼ Block the chain brake using the front hand
guard. To do this, push the front hand guard
forwards until it is heard to engage (1.).
◼ Turn the stop switch to the "I" position (2.).
◼ Remove the transit cover.
◼ Pull out the choke as far as stop (3.).
◼ Place the chainsaw on even ground and
secure. Step into the handle recess with
the right foot to do this.
◼ Secure the chainsaw with the left hand on
the front handle.
◼ Pull out the chainsaw's starter handle
on the cable until a resistance is felt.
Then continually pull out the starter
cable (4.) in doses 2 to 3 times until
the engine begins to start.
◼ Important: return the choke (14) to its
original position by hand
◼ Pull the starter handle (11) until the engine
starts.
◼ Engine starts:
− Chainsaw runs at idling speed
◼ Engine does not start:
− Repeat starting procedure until engine
starts.
◼ Slowly and surely lift the chainsaw up off
the ground. Do not touch the throttle trig-
ger when doing this!
◼ With the left hand, pull the front hand
guard (chain brake lever) towards the front
handle and, in doing so, release the chain
brake.
− The saw chain can now run freely on
the guide rail.
CAUTION!
39

Publicité

loading

Ce manuel est également adapté pour:

Fx-ksp354