Ryobi RBC-1000EX Manuel D'utilisation page 21

GB
F D E
SPECIFICATIONS
Voltage................................................. 230-240 V~50 Hz
Nameplate Power ................................................ 1000 W
No Load Speed
- Brushcutter ............................................... 7,000 min
- Trimmer .................................................... 6,000 min
Cutting Line ............................................................ 2 mm
Max.Cutting Path
- Brushcutter .................................................... 200 mm
- Trimmer.......................................................... 380 mm
Sound Pressure Level
- Brushcutter ................................................... 88 dB(A)
- Trimmer ........................................................ 84 dB(A)
Sound Power Level
- Brushcutter ................................................. 103 dB(A)
- Trimmer ....................................................... 96 dB(A)
Weight .................................................................... 4.8 kg
Vibration ................................................................. 8 m/s
DESCRIPTION
See Fig. 1 to Fig. 14 for these parts.
1. Trigger handle
2. Trigger
3. Lock button
4. Cord retainer
5. Motor housing
6. Front handle
7. Livetool indicator
8. Upper shaft
9. Attachment shaft
10. Shoulder strap
11. Blade guard
12. Blade
13. Wing nut
14. Coupler
15. Barrier
16. Bolt
17. Washer
18. Screws
19. Bracket
20. Clip
21. Hanger
22. Bump knob
23. Cut off blade
24. Spool
25. Trimmer head
26. Drive connector
27. Gear head
28. Upper flange washer
29. Cupped washer
30. Blade nut
I P NL S DK N FIN GR HU CZ RU
English
31. Mounting bracket
32. Spring
33. Cutting line
34. Grass deflector
35. Threaded mounting plate
-1
ASSEMBLY
-1
CONNECTING THE ATTACHMENT TO THE
UPPER SHAFT (FIG.2)
The coupler (14) connects the attachment to the upper
shaft.
Follow these steps to connect the attachment to the
upper shaft.
Loosen the wing nut (13) by tur ning it
■
counterclockwise.
Remove the end cap from the attachment shaft.
■
2
Align the button with the guide recess on the upper
■
shaft.
Slide the attachment shaft (9) into the upper shaft (8)
■
until the attachment shaft clicks into place.
Note: If the button does not release completely in the
positioning hole, the shafts are not locked.Slightly
rotate the attachment shaft until the button is locked
into place.
Tighten the wing nut (13) securely by turning it
■
clockwise.
Note: During operation, periodically check the wing
nut (13) and tighten as necessary.
REMOVING THE ATTACHMENT FROM THE
UPPER SHAFT (FIG.2)
Disconnect the upper shaft and attachment shaft for
storage or when a job calls for a different attachment.
Follow these steps to remove the attachment from the
upper shaft.
Release the trigger (2) and allow the trimmer to coast
■
to a stop.
Unplug the tool.
■
Loosen the wing nut (13) by tur ning it
■
counterclockwise.
Push the button, while pulling out the attachment.
■
ATTACHING THE FRONT HANDLE (FIG.3)
Follow these steps to attach the front handle.
Press the front handle (6) onto the upper shaft (8)
■
Place the front handle along the upper shaft to a
■
position that allows for comfortable operation.
15
RO PL SLO HR TR EST LT LV SK BG