Télécharger Imprimer la page

HOLZMANN MASCHINEN BBS810SMART-G Mode D'emploi page 55

Publicité

Les langues disponibles

Les langues disponibles

Engine oil exchange
The engine oil change would be explicitly mentioned here in order to be included in the machine
operating manual. Oil change interval after the first 20h or 1 month after commissioning and then
every 100h or 1x per year.
16.4
Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Make sure that
unauthorised persons and especially children do not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or already unpacked parts under the intended ambient conditions!
16.5
Disposal
Observe the national waste disposal regulations. Never dispose of the
machine, machine components or operating equipment in the residual waste.
If necessary, contact your local authorities for information regarding available
disposal options. If you purchase a new machine or equivalent equipment
from your specialist dealer, he is obliged in certain countries to dispose of your
old machine properly.
HOLZMANN Maschinen GmbH
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
1.
remove the oil drain plug (1) from the engine.
2. open the oil tank cap (2). Collect the draining oil in a
collection container and dispose of it properly.
3. retighten the oil drain plug after draining.
4. Fill in fresh oil through the filling opening (3) (see
section Checking the engine oil level).
5. Use only high quality engine oil, e.g: SAE30, 15W40 or
similar!!
www.holzmann-maschinen.at
NOTICE
NOTICE
Drain the used oil when the engine is warm.
Warm oil drains quickly and completely.
N O TE
55
BB810SMART-G

Publicité

loading