Publicité
Les langues disponibles
Les langues disponibles
Always keep the area around the muffler free of any foreign substances such as leaves, paper,
•
cartons etc. A hot muffler could ignite these substances and cause a fire.
Close the fuel tank cap again after refuelling.
•
•
Check the fuel line and tank regularly for leaks and cracks. Do not operate the machine if
leaks in the fuel system are known.
•
Store fuel only in designated and approved canisters.
12.6
Hazard warnings
Despite intended use, certain residual risks remain. Due to the design and construction of the
machine, hazardous situations may occur which are identified as follows in these operating
instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
TRANSPORT
Risk of injury from suspended or unsecured load!
Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death.
Transport the machine in its packaging to the place of installation. To manoeuvre the machine in
the packaging, a pallet truck or forklift truck with the appropriate lifting force) can be used, for
example. The specifications can be found in the chapter Technical data. For proper transport, also
observe the instructions and information on the transport packaging regarding centre of gravity,
lifting points, weight, means of transport to be used as well as the prescribed transport position
HOLZMANN Maschinen GmbH
WAR N I N G
C AU TI O N
WAR N I N G
Before use, therefore, check hoists and load slings for adequate load-bearing
capacity and perfect condition. Secure the loads carefully. Never stand
under suspended loads!
www.holzmann-maschinen.at
D AN G E R
N O TE
TRANSPORT
38
BB810SMART-G
Publicité
