VM Motori R754ISE5 Manuel D'instructions Pour L'emploi page 81

HANDLING AND LIFTING
Secure the engine with a lifting device
(lifting beam) of appropriate capacity.
IMPORTANT
The angle formed by the lifting device
chains must not exceed 5°, as shown
in fig. A.
Hook the lifting device to the fixing points
as shown in fig. A.
Before carrying out the lifting, identify the
centre of gravity of the load.
IMPORTANT
The brackets of the fixing points have
been dimensioned to lift the engine
only and are not type-approved to lift
any additional weight. Do not lift the
engine using a different procedure
from the prescribed one; otherwise, the
warranty for damages will be voided.
English
Fig. A
21
R754ISE5
MAX
5°
42432106F
GB