Burkert 8026 Démarrage Rapide page 5

3. INTENDED USE
Use of the transmitter that does not comply with the instruc-
tions could present risks to people, nearby installations and
the environment.
• 8026, 8036 and 8076 transmitters are intended to be used to
measure the flow rate of liquids:
- 8026 and 8036 transmitters are used to measure the flow
rate of neutral or slightly aggressive liquids
- the 8076 transmitter is used to measure the flow rate of
viscous liquids such as honey or oil, which are free of solid
particles.
• This device must be protected against electromagnetic interfer-
ence, ultraviolet rays and, when installed outdoors, the effects of
climatic conditions.
• This device must be used in compliance with the characteristics
and commissioning and use conditions specified in the contractual
documents and in the user manual.
• Requirements for the safe and proper operation of the device
are proper transport, storage and installation, as well as careful
operation and maintenance.
• Only use the device as intended.
4
All manuals and user guides at all-guides.com
english
Type 8026 - 8036 - 8076
Intended use
3.1. Foreseeable misuse
• Do not use this device in explosive atmospheres.
• Do not use this device for measuring the flow rate of gas.
• Do not use this device in an environment incompatible with the
materials from which it is made.
• Do not use fluid that is incompatible with the materials from which
this device is made.
• Do not subject the device to mechanical loads (e.g. by placing
objects on top of it or by using it as a step).
• Do not make any external modifications to the device. Do not paint
or varnish any part of the device.