Burkert 8026 Démarrage Rapide page 24

10. ADJUSTMENT AND
FUNCTIONS
10.1. Safety instructions
WARNING
Risk of injury due to non-conforming adjustment.
Non conforming adjustment could lead to injuries and damage the
device and its surroundings.
• The operators in charge of adjustment must have read and under-
stood the contents of this manual.
• In particular, observe the safety recommendations and intended
use.
• The device/installation must only be adjusted by suitably trained
staff.
Adjustment of the device can only occur if the display mod-
ule is fitted.
Refer to the instruction manual of the display module (order
code 560331, delivered with the display module) for the
mounting and dismounting instructions.
20
All manuals and user guides at all-guides.com
english
Type 8026 - 8036 - 8076
Adjustment and functions
10.2. Using the browse button
Symbolised by
in this manual
Symbolised by
in this manual
Fig. 10.1 Using the browse button
You want to...
...browse in Read mode
...access the reset menu for
totaliser 2, from Read mode
...access the reset menu for the
minimum and maximum flow
values measured, from Read
mode
Symbolised by
in this manual
Symbolised by
in this manual
Symbolised by in
this manual
Press...
• Next screen:
• Previous screen:
, when totaliser 2 is dis-
played in Read mode
, when the minimum and
maximum flow values are dis-
played in Read mode