Burkert 8026 Démarrage Rapide page 35

Type 8026 - 8036 - 8076
Maintenance and troubleshooting
11.3. If you encounter problems
Red Current Transistor
LED output output
ON 22 mA 1) depending
on thresh-
olds
ON 22 mA 1) depending
on thresh-
olds
ON 22 mA 1) depending
on thresh-
olds
ON 22 mA 1) depending
on thresh-
olds
All manuals and user guides at all-guides.com
Icon Message displayed
in the Info menu
"No sensor board"
ERR
+
"TR EE Fact Read"
ERR
+
"TR EE User Read"
"TR EE UserWrite"
ERR
+
"E:Frequency"
ERR
+
Meaning What to do
→
The link to the measure-
→
ment module is interrupted
→
Parameter reading error
→
→
→
Parameter saving error
→
→
→
→
The input frequency is out
of range.
This message is displayed
→
if monitoring of the input
frequency is activated,
→
depending on the pro-
grammed thresholds ERR →
LO and ERR HI).
Switch the power supply off then on again
if the error persists, return the device to Bürk-
ert
Switch the power supply off then on again
if the error persists, set the device back to the
default settings
if the error persists, return the device to Bürk-
ert
Switch the power supply off then on again,
save the parameters again
if the error persists, set the device back to the
default settings
if the error persists, return the device to Bürk-
ert
Go into the "Sensor" function in the Diag-
nostic menu to read the value of the input
frequency
check that the paddle is clean and that it ro-
tates freely on its axis or
check that the oval gears rotate freely.
check the installation.
english 29