Burkert 8026 Démarrage Rapide page 11

Type 8026 - 8036 - 8076
Technical data
7.4. Electrical data
Power supply
• version with 2 or 3 outputs (2 wires)
• version with 4 outputs (3 wires)
Characteristics of the power source (not provided) of
UL recognized devices, with variable key PE72
Power consumption
• version with 2 or 3 outputs (2 wires)
• version with 4 outputs (3 wires)
Consumption, with charges on transistors
Protection against polarity reversal
Protection against spike voltages
Protection against short circuits
Transistor output
• version with a single transistor output
• version with 2 transistor outputs
Current output
• version with a single current output (2 wires)
• version with 2 current outputs (3 wires)
All manuals and user guides at all-guides.com
• 14-36 VDC, filtered and regulated
• 12-36 VDC, filtered and regulated
• limited power source (in accordance with § 9.3 of the UL 61010-1 standard)
• or class 2 type power source (according to the 1310/1585 and 60950-1 stand-
ards)
• 25 mA max. (at 14 VDC)
• 5 mA max. (at 12 VDC)
1 A max.
yes
yes
yes, for the transistor outputs
• NPN, open collector, 700 mA max., 1-36 VDC
• NPN (/sink) or PNP (/source) (depending on programming), open collector,
700 mA max., 500 mA max. per transistor if the 2 transistor outputs are wired
NPN output: 1-36 VDC
PNP output: supply voltage
4-20 mA, sink ("NPN sink") or source ("PNP source") (depending on programming)
• max. loop impedance: 1100
• max. loop impedance: 1100
Ω Ω
at 36 VDC, 610 at 24 VDC, 180
Ω Ω
at 36 VDC, 610 at 24 VDC, 100
english
Ω
at 14 VDC
Ω
at 12 VDC
9