Burkert 8026 Démarrage Rapide page 15

8. INSTALLATION AND WIRING
8.1. Safety instructions
DANGER
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure in the pipes
before detaching the device from the pipe.
Risk of injury due to electrical discharge.
• Shut down and isolate the electrical power source before carrying
out work on the system.
• Observe all applicable accident protection and safety regulations
for electrical equipment.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and safety
relating to the use of aggressive fluids.
12
All manuals and user guides at all-guides.com
english
Type 8026 - 8036 - 8076
Installation and wiring
WARNING
Risk of injury due to non-conforming installation.
• The electrical and fluid installation can only be carried out by quali-
fied and skilled staff with the appropriate tools.
• Install appropriate safety devices (correctly rated fuse and/or
circuit-breaker).
• Respect the assembly instructions for the connector used.
Risk of injury due to unintentional switch on of power supply or
uncontrolled restarting of the installation.
• Take appropriate measures to avoid unintentional activation of
the installation.
• Guarantee a set or controlled restarting of the process subsequent
to the assembly of the device.
8.2. Installation onto the pipe
DANGER
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure in the pipes
before detaching the device from the pipe.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and safety
relating to the use of aggressive fluids.