Burkert 8026 Démarrage Rapide page 33

Type 8026 - 8036 - 8076
Adjustment and functions
Detailed procedure of a Teach-in by flow ("Flow.Teach" function
in the "Sensor" menu)
→
Choose the volume unit in which the teach-in is run:
Calib Sensor
→
Run the teach-in:
Calib Sensor
Establish the flow in the
pipe and wait until it is sta-
bilised
Start Teach
OK
Measure
00005 l/min
1)
Measurement can be suspended at any time by selecting "OK".
All manuals and user guides at all-guides.com
Flow Teach PVar:
Flow Teach
The transmitter calculates the
flow rate measured in the pipe,
with the current K factor, for
100 seconds 1) .
Flow Teach
The transmit-
0049 L/min
ter displays the
0001 L/s
average flow
calculated with
the current K
factor.
The trans-
mitter dis-
Cal.Result
plays the K
K teached:
factor cal-
K=3,810
culated by
teach-in.
BACK
Cal.Result
save:Yes/No
Save the new K fac-
tor calculated or not.
english
Input the value of the
flow rate in the pipe.
Modify the time unit
OK
if necessary.
If the K factor calcu-
K teached set
lated is ≥ 9999, it is
to max K=9999
forced to 9999.
BACK
save modified
data? Yes/No
Confirm the K factor =9999 with
"YES"
or keep the current K factor with
"NO".
27