Burkert 8026 Démarrage Rapide page 28

Type 8026 - 8036 - 8076
Adjustment and functions
10.4. Description of the display
10.4.1. Description of the icons and LEDs
When the message "ERROR - This display does not sup-
port this Element - Contact Bürkert" is displayed, the
version of the display module is not compatible with the
software version of the transmitter. Contact your Bürkert
retailer.
Flow_L
Flow_m3
Red LED: indi-
ERR
cates an error;
see § 11.3
Yellow LED: indicates
that transistor 1 is
switched
Fig. 10.2 Position of the icons and description of the LEDs
All manuals and user guides at all-guides.com
600.0l/h
0.60/h
Not used
Yellow LED: indicates that
transistor 2 is switched
The LEDs on the display module are duplicated on the elec-
tronic board that is located under the display module: these
LEDs become visible when the transmitter is not equipped
with the display module.
Yellow LED: indicates
that transistor 1 is
switched
Yellow LED: indi-
cates that transistor
2 is switched
Fig. 10.3 Position of the LEDs on the electronic board
english
Green LED: indi-
cates that the de-
vice is switched on
Red LED: indi-
cates an error;
see § 11.3
23