hestan KSO 30 Manuel D'utilisation page 20

USING THE OVEN
SETTING COOKING MODE AND TEMPERATURE
The following modes can be selected by moving the cooking mode knob to the desired position.
EN
To select Clean, the temperature knob must be moved into the Clean position too.
Select the desired temperature by moving the
selector or leave it in the PRESET position if the
proposed value is fine. The temperature can be
changed by 5°F or 5°C steps.
As soon as one of the knobs is moved, the control
switches automatically to display the value in the
corresponding cavity. The corresponding message
"UPPER" or "LOWER" appears.
Cavity will begin to heat, "ON" is displayed when
the selected oven is active, oven lights will turn on.
"PREHEAT" message is displayed. Once the oven
has preheated, it will beep and switch the message
off.
To change the temperature while cooking, simply
turn the temperature knob until the display shows
the desired value.
Dual Cavity models: Touch
select the desired cavity and check the related
temperature or time values, even is there's no need
to change those.
Dual Cavity models: The triangles in the upper right
corner of the display are active when a cavity is
running, even if it is not selected on the display.
Move the cooking mode selector to OFF if you
intend to stop cooking.
USING
MENU
When cooking mode selector is set to Low Temp mode, the most recently used Low Temp
function will be displayed:
To select a different mode, touch the
toggle between them.
The last used is kept in memory for the next
selection.
18
©2018 Hestan Commercial Corporation
All manuals and user guides at all-guides.com
UPPER/LOWER
KEY TO SELECT LOW TEMPERATURE FUNCTIONS
MENU
Cook Mode Selector
OFF
CONVECTION BAKE
CONVECTION BROIL
CONVECTION ROAST
PIZZA
BAKE
BROIL
to
DEHYDRATE
PROOF
DEFROST
WARMING
CLEAN
Low Temperature Mode
key to
DEHYDRATE
PROOF
DEFROST
WARMING
Display value
CONV BAKE
CONV BROIL
CONV ROAST
MULTI PIZZA
BAKE
BROIL
CONV DEHY
WARM
CONV
WARM PLUS
Display value
CONV DEHY
WARM
CONV
WARM PLUS