hestan KSO 30 Manuel D'utilisation page 19

OPERATIONAL SUGGESTIONS
SETTING THE CLOCK AND TIMER
The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns
to the oven, the clock displays the time 12:00
The clock time will appear during all oven operations except when there is the timer or any
timed cooking operations running.
The oven is preset to a 12-hour clock and indicates
TO SET THE TIME OF DAY
Touch until the display shows "SET TIME".
TIME
Touch or to set the desired time, the hours will begin flashing: continue until the correct
+ −
hour value and or indication is selected.
AM PM
Touch again to confirm the hour and minutes will start flashing.
TIME
Touch or to set the desired minutes value or hold the key to change by 10 minute steps.
+ −
Touch again or wait for 5 seconds in order to
TIME
confirm the time.
NOTE: The Time of Day can never be set if any time
function is already set: first delete all the active time
functions.
TO SET THE TIMER
Touch until the display shows "TIMER".
TIME
Touch or to set the desired timer value, the hours will begin flashing: continue until the
+ −
desired value is set.
3.Touch again to confirm the hour and minutes will start flashing.
TIME
Touch or to set the desired minutes value or hold the key to change by 10 minute steps.
+ −
Touch again or wait for 5 seconds in order to confirm the time.
TIME
"TIMER" will be steadily displayed.
When the time ends, reminder beeps will sound for 15 minutes or until the
Timer format is HR:MIN until the last minute, then it switches to MIN:SEC.
The displayed value is always rounded to the lower
minute.
All manuals and user guides at all-guides.com
.
AM
AM
(CONT.)
and .
PM
TIME
©2018 Hestan Commercial Corporation
key is pressed.
17
EN