Panasonic AW-RP50E Mode D'emploi page 5

How to turn the power of the remote cameras on and off
 How to turn the power of the 
remote cameras off
Follow one of the procedures below to turn off the power of
the remote cameras.
  Turning off the power one camera at a time
  Turning off the power of a multiple number of cameras
• Turning off the power of all the cameras
• Turning off the power of the selected group of cameras
Each of these procedures is described in turn below.
Turning off the power one camera at a time
1
Select the remote camera.
When the corresponding CAMERA STATUS/
SELECTION button is held down, the name of the
remote camera is displayed on the top line of the LCD
panel and POWER ON is displayed on the bottom line.
2
Turn the F2 dial to select "OFF", and press the
F2 dial.
The power of the selected remote camera is turned off.
CAM100<AW-HE50 >
POWER:OFF
POWER ALARM
1 2
MENU PAGE GAIN/PED R/B GAIN R/B PED
6 7
STORE DELETE DETAIL SCENE/MODE CAMERA
PRESET MEMORY / MENU
1 2
IRIS AUTO
CAMERA STATUS / SELECTION
1
All manuals and user guides at all-guides.com
2
F1
F2
F1 CAMERA
OSD
3 4 5
AWB/ABB SHUTTER F2 EXIT
8 9 10
SETUP SYSTEM USER1 USER2
3 4 5
PT ACTIVE
Turning off the power of a multiple number of cameras
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set PRESET MEMORY/MENU 8 button
(CAMERA) to ON.
When the button is pressed and its indicator is lit, the
[CAMERA] menu is displayed on the LCD panel.
[1]GROUP
3
Turn the F1 dial to display the [POWER] menu,
and press the F1 dial.
[2]POWER
1.CAM POWER
Turning off the power of all the cameras
4
Turn the F2 dial to select "ALL OFF", and press
the F2 dial.
1.CAM POWER
The power of all the remote cameras is now turned off.
Turning off the power of the selected group of
cameras
4
Turn the F2 dial to select "GROUP OFF", and
press the F2 dial.
1.CAM POWER
The power of the selected group of remote cameras is
turned off.
4 (E)
▼
Press the F1 dial.
▼
ALL OFF
▼
ALL OFF
▼
GROUP OFF