Publicité
Les langues disponibles
Les langues disponibles
Checking the equipment alarm information
It is possible to check the alarm statuses of the unit and
the remote cameras assigned to the CAMERA STATUS/
SELECTION buttons.
1
Set the MENU button to ON.
Press the MENU button to light its indicator.
2
Set PRESET MEMORY/MENU 10 button
(SYSTEM) to ON.
When the button is pressed and its indicator is lit, the
[SYSTEM] menu is displayed on the LCD panel.
[1]CAMERA CTL
3
Turn the F1 dial to display the ALARM menu,
and press the F1 dial.
[10]ALARM
Press the F1 dial.
1.POWER
No ALARM
4
Turn the F1 dial to select the unit (POWER) or
remote camera item (CAM1 to CAM100).
The alarm status is displayed underneath.
1.POWER
No ALARM
Turn the F2 dial.
2.CAM1
All manuals and user guides at all-guides.com
▼
▼
▼
FAN ALM
[Select POWER]
The unit's power supply alarm can be checked.
No ALARM:
When the power supply is trouble-free.
ALARM:
When trouble has occurred in the power supply.
[Select CAM1 to CAM100]
The alarm statuses of the remote cameras currently
assigned to the CAMERA STATUS/SELECTION buttons
are displayed.
No ALARM:
Trouble-free.
FAN ALM:
Trouble has occurred in the cooling fan.
P/T ALM:
Trouble has occurred in the pan/tilt operation.
FAN ALM+P/T ALM:
Trouble has occurred in the cooling fan and pan/tilt
operation.
Note
When an alarm has occurred, stop operation
immediately, and be absolutely sure to contact your
dealer.
Continued use may cause the unit to malfunction.
34 (E)
Publicité
