Publicité
11
12
13
14
15
16
17
18
19
DV102-K.p55-57.p65
WIND-CUT (p. 28)
11
To reduce sound distortion caused by
wind hitting the microphone.
12
ZOOM-MIC (p. 19)
When set to ON, the microphone's
directional angle and sensitivity vary
according to the zoom operation.
REMOTE (p.
13
VCR1: To receive signals from the
VCR2: To receive signals from
OFF:
BEEP
14
Set to ON to hear beep when starting
and stopping camera recording or
when unusual conditions occur. To
cancel the beep, set to OFF.
Palmcorder will beep:
Once when you start recording
Twice when you stop recording
Repeatedly when warning of
unusual conditions.
(p. 54)
15
DISPLAY (p. 61)
To select the desired type of display
and counter indication displayed on
the LCD Monitor or in the viewfinder.
C.RESET (p. 61)
16
Setting to ON resets the counter to
zero.
DATE/TIME (p. 60)
17
The date and time can be set and
displayed on the screen.
CLOCK-SET (p. 14)
18
When set to ON, the date and time
can be set on the screen.
LCD/EVF SETTING (p. 17)
19
Setting to ON displays the menu for
adjusting the LCD brightness,
colour level, and the EVF brightness.
57
MENU OSD
9)ly
Remote Control, set to VCR1.
the Remote Control, set to
VCR2.
To prevent reception of
signals from the Remote
Control.
57
02/06/06, 13:15
Publicité
