Publicité
Using the LCD Monitor
The LCD (Liquid Crystal Display) monitor
can be used while recording.
180°
90°
90°
To adjust the LCD/EVF
BRIGHTNESS or COLOR
1, 5
MENU
2, 3, 4
JOG KEY
EVF/LCD
DV102-K.p16-20.p65
Camera Recording
1
Press LCD-OPEN to unlock the LCD
monitor.
2
Swing the LCD monitor fully open
and adjust the viewing angle.
• The LCD monitor will automatically
turn on.
1
• When the LCD monitor is completely
LCD-OPEN
closed, it will shut off automatically to
save power.
• Adjust the LCD Brightness and/or
colour of the LCD monitor if
necessary. Please refer to "To adjust
the LCD/EVF BRIGHTNESS or
COLOR" below.
3
Start recording.
Note
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
1
Press MENU to display the main menu
screen.
2
Rotate JOG KEY to select
SETTING
(Menu OSD: pp. 57, 59)
3
Press JOG KEY to display the LCD/
EVF SETTING screen.
4
Press JOG KEY to select LCD
BRIGHTNESS, LCD COLOR, or
EVF BRIGHTNESS, then rotate JOG
KEY to adjust.
5
Press MENU twice to exit this mode.
17
LCD/EVF
from the main menu screen.
17
02/06/06, 13:13
Publicité
