Measuring Object Temperature/Room Temperature - Beurer FT 100 Mode D'emploi

9. Measuring object temperature/room temperature

If you want to measure an object temperature with
this thermometer, switch to object temperature mode.
• With the thermometer switched on, briefly press
the MODE/MEM button. The device switches to
the object temperature mode (Fig. 15).
• Hold the thermometer 2 to 3 cm from the measuring
point. Briefly press the
the temperature on the display (Fig. 16).
Measurements taken in object temperature mode are not stored.
If you want to use the thermometer to measure the room temperature
you need to switch to room temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM
button twice.
The device switches to room temperature mode
• The room temperature is immediately displayed (Fig. 17).
Measurements taken in room temperature mode are not stored.
/ SCAN button and read
48
Fig. 15 Fig. 16
.
Fig. 17