Initial Use; Switching On And Setting The Thermometer - Beurer FT 100 Mode D'emploi

6. Initial use

If there is a battery isolation strip, pull it out of the battery compart-
ment. The thermometer automatically switches on and the settings
menu appears in the display (w 7. Switching on and setting the ther-
mometer).

7. Switching on and setting the thermometer

To switch on the thermometer, briefly press the / SCAN button.
After a brief self-test and two short beeps the thermometer is ready for forehead measure-
ment. The device always starts up in forehead temperature mode .
Set the basic functions
This menu allows you to set the following functions individually, one after another.
Time Temperature Acoustic Illuminated
Date Time
format measurement unit signal display
40