Initial Use; Switching On And Setting The Thermometer - Beurer FT 90 Mode D'emploi

• Outside temperature
• Time of day
Body temperature is lower in the morning and increases throughout the day towards
evening.
• Activities
Physical and, to a lesser extent, mental activities increase body temperature.
Note:
Taking the body temperature provides a current measurement of a person's temperature.
If you are uncertain about interpreting the results or if the values are abnormal (e.g. fever),
please consult your doctor. This also applies in the case of slight temperature changes if
there are other symptoms of illness such as agitation, severe sweating, flushed skin, fast
pulse rate, tendency to collapse, etc.

5. Initial Use

If provided, pull out the battery insulating strip at the battery compartment or remove the
protective film from the battery and insert the battery with the correct polarity.

6. Switching On and Setting The Thermometer

The measuring sensor should be cleaned before and after each use, to eliminate dirt
and fingerprints and ensure accuracy of your readings.
Briefly press the On/Off button
After a brief self-test and two short beeps the thermometer is ready for forehead
measurement.
The device always starts up in forehead temperature mode
.
12
.