Beurer FT 100 Mode D'emploi page 42

The hour flashes on the display (Fig. 4).
• Use the MODE/MEM button to set the hour, and
confirm with the LIGHT/SET button.
The minute flashes on the display (Fig. 5).
• Use the MODE/MEM button to set the minute, and
confirm with the LIGHT/SET button.
In the 12 h format, the time is displayed with AM/
PM.
The temperature measurement unit flashes on the dis-
play (Fig. 6).
You can set the device to display the temperature in
C
degrees Celsius (°
• To display the temperature in Celsius, select °C us-
ing the MODE/MEM button and confirm with the
LIGHT/SET button.
• To display the temperature in Fahrenheit, select °F
using the MODE/MEM button and confirm with the
LIGHT/SET button.
) or degrees Fahrenheit (°F).
Fig. 4
Fig. 6
42
Fig. 5