Measuring Object Temperature/Room Temperature - Beurer FT 95 Mode D'emploi

9. Measuring object temperature/room temperature

If you want to measure an object temperature with this ther-
mometer, switch to object temperature mode.
• With the thermometer switched on, briefly press the
MODE/MEM button. The device switches to the object
temperature mode
• Hold the thermometer 2 to 3 cm from the measuring
point. Briefly press the SCAN button and read the tem-
perature on the display (Fig. 17).
The device automatically switches off after approx. 60 sec-
onds or you can press the
Measurements taken in object temperature mode are not stored.
If you want to use the thermometer to measure the room temperature you
need to switch to room temperature mode.
• With the thermometer switched on, briefly press the MODE/MEM but-
ton twice.
The device switches to room temperature mode
• The room temperature is immediately displayed (Fig. 16).
The device automatically switches off after approx. 60 seconds or you can
press the button to switch it off.
Measurements taken in room temperature mode are not stored.
(Fig. 16).
button to switch it off.
53
Fig. 16
.
Fig. 17
Fig. 18